Abstract

Pharmaceuticals and personal care products (PPCPs) are widely used worldwide and cause potential soil pollution. Fe2+-activated persulfate (PS) processes (Fe-PAPs) are promising techniques for soil remediation. However, a knowledge gap exists in the mechanistic insights into the dominant factors affecting the degradation of different PPCPs in varied soil types. This study systematically investigated the roles of soil components and pollutant properties in the degradation of three PPCPs (triclosan (TCS), triclocarban (TCC), and naproxen (NPS)) in the nine soils in the Fe2+/PS system. The degradation efficiencies of TCS and NPS ranged from 10.92 % to 91.62 % and 46.59 % to 99.81 %, respectively, whereas nearly no degradation was observed for TCC. PPCPs with high water- solubility, high energies of the highest occupied molecular orbital (EHOMO), low pKa values, low energy gap (ΔE), or low vertical ionization potential (VIP) were more favorable for degradation. XPS analysis suggested that aliphatic carbon (Ali–C–C(H)), ether or alcohol carbon (C–O), and aldehyde or ketonic carbon (CO) on SOM significantly inhibited TCS degradation. The results of ROS quenching experiments showed that SO4•− and 1O2 played major roles in TCS and NPS degradation in the six soils, with the relative contributions ranged from 24.82 % to 99.14 % and 0.15 % to 73.40 %, respectively. The interaction between soil components, active species, and pollutants resulted in the distinct intermediates of TCS and NPS in different soils. Our findings provide in-depth insights into the role of soil composition and pollutant properties on the remediation of PPCP-contaminated soils in Fe-PAPs.